Battery test equipment is not a novel thing at present, and everyone has read and seen it a lot. So what are the basic principles of each part of battery test equipment? Let's take a look at it together.

1. Test disc structure: The two-process rotation design of the test disc is adopted, which can carry out the battery electric function test and the anti-counterfeiting label at the same time, and carry out the information input of the anti-counterfeiting label in the rotating link, which can ensure the output power. The maximum production capacity per hour can reach 700PCS, and the average production capacity can reach 650PCS.

2. Feeding structure: The feeding of the battery is centralized by the feeding box, and 120PCS battery is stored in one action. It only needs to be fed by staff 5-6 times per hour, and one staff can take care of 3 machines at the same time. Equipment , Compared with the original traditional hand-made test, it can save more than 80% of human resources.

3. Opening structure: After the battery is tested to meet the standard, the bottom plate of the battery compartment is opened by the No. 2 process cylinder installed at the bottom of the test disc, and the battery is slid from the bottom end along the slide rail to the work table. Packaging. Defective products are lifted by the No. 1 process cylinder installed at the bottom of the test disc, and defective products are slid to the defective product storage area by another slide rail.

4. Battery testing equipment barcode entry system: barcode entry, a total of 2 barcodes need to be entered, one is a two-dimensional barcode on the battery, and the other is a one-dimensional barcode on the anti-counterfeiting label Barcodes, the barcodes on the battery are automatically scanned by a barcode reading software from the bottom during the running process of the test disc (when rotated 90 degrees). ) installed on the scanning gun to carry out the scanner. The two barcodes are associated and stored in the system software.

5. Identification separation structure: identification peeling machine (bar code machine) is a kind of self-adhesive label or identification used to separate the whole bundle of cutting materials from the release paper. One and ensure that the error in the direction of the bottom of each bid is less than ±0.2mm,

6. Pneumatic control system software: The pneumatic control system software includes pneumatic linear modules, cylinders, relays, vacuum generators, vacuum suction cups, etc. It is mainly used to transport the battery from the feeding box to the battery compartment or open the battery compartment. sports.

7. Stepper motor fitness motion control system software: test the rotation of the disc. The movement of the battery feeding box is all controlled by the stepper motor, and the stepper motor controller can accurately control the running precision by using single pulse control to ensure the test stability.

8. Battery test equipment electrical function test system: battery full load voltage test, using an "Agilent digital multimeter" application GPIB for data acquisition and output to PC for analysis and description.