High and low temperature boxes are getting more and more attention and application in various fields. This facility can provide ultra-low temperature, high temperature and other characteristics, which can reasonably test whether each product is integrated into the diverse geographical environment. Today we will talk about the application of high and low temperature boxes. Things not to do in the whole process:

1. The temperature difference between the geographical environment of the high and low temperature box does not need to be very large: the temperature difference of the geographical environment is too large, which will lead to a lot of water vapor in the use of the high and low temperature box, which will cause corrosion of electronic components in the long run, which is very easy to cause Damage to machinery and equipment.

2. There is no need to be close to the heat source: the two sides of the temperature box should be pre-buried with 60-70cm of equipment maintenance and indoor space design, which can help the heat pipe radiator of the machine and equipment, and special attention is not required to be placed in some heating electrical products. At the same time, prevent the power consumption of the high and low temperature box from increasing;

3. When the high and low temperature box is in use, if the door is opened, the time should be reduced. If the power is turned off, there is no need to wait to open the door of the tester, because within a certain period of time, there may be a certain temperature in the box. No wiring, try again;